Dark Gray Acacia Wood Decking Tiles 12 Slats

Build Your Dream Deck with Dark Gray Acacia Wood Decking Tiles 12 Slats

At Woodspace, we prioritize quality and durability. Our tiles are built to last and can be used in a wide range of applications. We’re committed to your satisfaction, so if you ever have any concerns, don’t hesitate to contact us. We’ll be happy to assist!

USER GUIDE

1. Step 1 – Prepare the surface
   Although you can install interlocking deck tiles on dirt, rocks, or asphalt, there should be no large cracks,
   bumps, or depressions that could cause the tiles to lie unevenly or “rock” on the surface. If the surface
   is particularly rough or cracked, it’s advisable to level the surface with a suitable exterior patching
   compound or filler. On hard dirt surfaces, sand, or gravel, the surface should first be leveled, well
   compacted, and then covered with a weed control barrier. To provide good drainage under the tiles, the
   surface should normally slope slightly away from the outer wall of any structures.
2. Step 2 – Click the tiles in place
   When installing interlocking deck tiles, it’s best to start laying the tiles from one of the outer corners of the
   area you want to cover and work inwards towards the exterior wall. After you have positioned the first tile
   in the corner of your workspace, take a second tile and align the connecting tabs on one edge of the first
   tile with the corresponding connecting tabs on the second tile. Push the second tile down firmly so that
   both tiles lock firmly together. Repeat this simple “snap in place” process, working in a diagonal direction
   across the area.
   If installing the tiles in an area confined by walls on opposite sides, a small gap must be left
   against the wall to allow for the expansion of the tiles which occurs not only due to temperature changes but
   also due to the expansion of the wood when it absorbs moisture.
3. Step 3 – Finishing touches
   With the last row of tiles, you may need to cut some tiles to fit any remaining gaps. SwiftDeck Ipe wood
   tiles can be easily cut with a handsaw, jigsaw or other power saw, taking care the saw does not contact
   any of the screws in the base of the tile. You can also cut the tiles to fit around posts or pipes.
   To provide a neat, professional finish to your design, straight edging is available which clips onto the edge
   of the outer row of tile. Mitered corner edging is available (in pairs) for external corners.
4. Step 4 – Caring for your deck
   We strongly recommended to put the tiles away or cover it during winter. Cleaning tiles often reduces
   the rate at which the tiles will naturally fade when exposed to direct sunlight.