How To Install Interlocking Deck Tiles On Dirt – Quick Guide

Learn about installing interlocking deck tiles on dirt. These pleasing tiles are easy to install, non-slip, and weather-resistant.

Most modern deck tiles have a click lock system and therefore are the easiest decking material to install. Would you like detailed procedures on how you can fix them? To help you with your installation project, we researched extensively on this matter. This is what we found out.

The following are the processes to follow while installing interlocking deck tiles on dirt:

1. Select a suitable position for your deck tiles.
2. Lay out your deck.
3. Level the surface area.
4. Apply weed killer.
5. Create a sturdy base.
6. Set the tiles in place.
7. Cut any surplus deck tiles.
8. Install edging.
9. Seal the deck tiles.

In this tutorial, you will learn the following steps to install these interlocking deck tiles. Furthermore, we will discuss what is offered in the market.

How To Install Interlocking Deck Tiles On Dirt?

Anyone can install the interlocking deck tiles on dirt with lots of ease and within a very short time. This material is made up of two looped edges and two pegged edges. These two simply click together with a push. Here’s everything you’ll need for a lightning-fast installation process:

Select a suitable position for your deck tiles

If you are determining the location to put your deck, do not choose very wet places such as areas that have depressions where water can accumulate.

In addition, to ensure that there is adequate drainage at the base of the tiles, the surface should normally have a slight gradient towards the building’s outside walls.

Lay out your deck

Start by drawing your favorite design on a piece of paper before you get started. Therefore, the opportunities offered by various tile types or placement of the tiles in different combinations allow you to quickly and effectively create unique individual patterns, designs, and borders.

Do not forget that if you are not a fan of the initial design that you created, you can always rearrange the tiles and put them back in place.

Level the surface area

Interlocking deck tiles may be laid on pebbles, asphalt, or ground but there should be no deep lows or highs that make the tiles move or lay crooked.

To ensure this, level the ground before you lay your deck tiles. In the case of a small area, it can be done manually by using a shovel, hoe, and rake. For very large areas of the floor, you may need a tiller or some other equipment.

Apply weed killer

Cover the leveled and fully compacted hard earth, sand, or gravel surfaces with a weed control barrier to prevent ground grass or weeds from getting between the slats.

Create a sturdy base

Soil and grass are weaker materials and change their position with time. To avoid this, lay a good sub-base on top of the leveled ground you have created.

Establish a foundation out of gravel, fine-grained sand, or poured concrete. You can use a rake to level off this base before packing it down. It will serve as a cushion and a shield that prevents your tiles from coming into direct contact with the debris on the ground.

Set the tiles in place

It is commonly recommended to start installation from one of the corners in the area and move towards the outer wall. When placing the first tile in any corner of your workstation, the connecting tabs of one side should fit into the connecting tabs of the second tile.

Slightly twist the tabs towards the center as a way of snapping the second tile into the first one tightly. In this case, it is possible to repeat the described simple “snap in place” technique to cover the entire area.

Cut any surplus deck tiles

Some tiles may be required to be trimmed to make them fit the last row and to close any gaps. Using a jigsaw, handsaw or other power saw to cut wood deck tiles is easy so long as no screws in the tile base are taken out. The tiles also can be trimmed to fit around pipes and posts.

Install edging

Placing an edging along the perimeter of the floor is optional but serves to hold the tiles in place. The normal landscaping edging or the flagstones if stacked on end can also be used.

Seal the deck tiles

To guard against the damaging effects of weather, growth of mold or mildew, and effects of strong sunlight, use a good quality decking oil or sealer on the deck tiles as soon as possible after their installation.

Decking oil/sealer should be reapplied after a year, or sooner, depending on the climate, amount of rainfall, amount of sun exposure, and according to the manufacturer’s advice.

It is best to select a sealer/oil over traditional oil/turpentine treatments that possess a high solids content, UV stabilizers, and visible iron oxide.

What Is the Best Interlocking Deck Tiles Available on the Market?

Interbuild Acacia Hardwood Deck Tiles are relatively cheaper than other Interbuild Decking products. Rather than teak, such tiles are produced from acacia. While not as famous as teak, acacia is still a sturdy and water-resistant type of wood. The tiles are provided pre-seasoned and can be used immediately after unpacking the product.

Apart from Acacia hardwood deck tiles, Woodspace is one of the most popular Acacia Hardwood Deck Tiles suppliers in Vietnam. Focusing on Acacia wood, which is sourced responsibly, Woodspace offers its clients high-quality deck tiles that may enrich outdoor areas. These tiles are very durable and suitable for use in areas that are exposed to harsh weather conditions such as patios, balconies, and pathways. Woodspace has remained at the forefront of outdoor flooring solutions in Vietnam as it is dedicated to implementing sustainable practices and unique layouts.

Conclusion

While you cannot lay interlocking deck tiles on dirt, it is possible to ready your yard for these deck tiles as described above. We believe this post will assist you in achieving the best decking project.

Visit our website to learn more about their products and get ideas for your next outdoor remodel. Feel free to contact us via:

• Facebook: Woodspace Vietnam  
• Instagram: woodspace.vn
• LinkedIn: Woodspace vn
• Google Maps: Woodspace – Outdoor Furniture

We look forward to the opportunity to work with you soon!